8V 300MA 8.5MM LED REPLACEMENT LAMP FITS SANSUI KENWOOD ONKYO OTHERS

Description

8 VOLT
HIGH OUTPUT
8.5MM 1/2 WATT LED REPLACEMENT LAMP FOR  MANY RECEIVERS INCLUDING PIONEER SANSUI KENWOOD AND OTHERS.
THESE LONG LASTING
8.5MM
WIDE DISPERSION(60 DEGREES MIN)LED CIRCUIT REPLACEMENTS HAVE AN AVERAGE LIFESPAN OF
100,000 HRS
.THE AVERAGE INCANDESCENT BULB LIFESPAN IS 1000 HRS. DRAWS 50-75 MILLIAMPS AND LEADS ARE 8 INCHES LONG 24GA STRANDED. USED FOR AUDIO EQUIPMENT BACKLIGHTING AND POWER INDICATION IN MANY UNITS. BUYERS TO DATE HAVE USED THESES IN THE FOLLOWING UNITS:
SANSUI G33000,G7500,G8000,G9000,G9700,TU9900. KENWOOD 5400, 6600,7600,9400,9600
. JUST CUT OUT OLD BULB, SAVING RUBBER LAMP HOLDER TO REUSE WITH LED REPLACEMENT. BULBS ARE AVAILABLE IN WHITE, BLUE, GREEN, RED, WARM WHITE, AND ULTRA-VIOLET. SEE PICS.
AS ALWAYS
,
THANKS FOR LOOKING.
NOTE: PRICE APPLIES TO ONE 8 VAC 8.5MM
LED REPLACEMENT BULB.
PLEASE SPECIFY
COLOR
ON ORDER OR BY E-MAIL TO AVOID DELIVERY DELAY. I WILL NOT ASSEMBLE OR SHIP WITHOUT THIS INFORMATION.
ALLOW 3 DAYS TO SHIP AS THESE ARE BUILT TO ORDER.
Lamp Information
Kenwood 600T and 650T
8 volt 300 milliamp X 5 bulbs (two for dial and one for each of the meters) X 5 green-tinted bulbs with rubber grommet base and wire leads Kenwood 600T and 650Tfor dial and one for each of the meters)
Kenwood KR-5400
Meters and dial use 8 volt 200 milliamp X 5 bulbs with rubber grommet base and wire leads.
Kenwood KR-7600 receiver
Dial uses 8 volt 300 milliamp X 6 bulbs with rubber base that push over two pins, same as the Sansui TU-717. Meters use 8 volt 200 milliamp X 4 frosted bulbs with rubber grommet base and wire leads. Button indicator lamps - 8 volt 50 milliamp t1.75 grain of wheat bulbs.
Kenwood KR-9600 receiver
Dial uses 8 volt 300 milliamp X 6 bulbs with rubber base that push over two pins, same as the Sansui TU-717. Meters use 8 volt 200 milliamp X 4 frosted bulbs with rubber grommet base and wire leads. Button indicator lamps - 8 volt 50 milliamp t1.75 grain of wheat bulbs.
Kenwood KR-x500 and KR-x600 receivers
8 volt 200 milliamp bulbs with rubber grommet base and wire leads, and 8 volt 300 milliamp bulbs with rubber base that push over two pins.
Kenwood KT-80
8 volt 50 milliamp X 1 (power switch cap)
Kenwood KT-615
8 volt 50 milliamp X 1 (stereo indicator)
12 volt 150 milliamp X 2 - Physically the same as those used in the KT-815 (8 volt 300 milliamp).
Kenwood KT-815 and KT-8155
Dial and Meters use 8 volt 300 milliamp X 4 green-tinted bulbs with rubber grommet base and wire leads.
Kenwood KT-917
8 volt 300 milliamp X 5 identical to those in the 600T.
Kenwood KT-1000
8 volt 150 milliamp X 1
8 volt 50 milliamp X 2 (stereo and lock indicators)
Kenwood KT-5500
8 volt 300 milliamp X 2 green-tinted bulbs with rubber grommet base and wire leads - one for dial and one for meters.
Kenwood KT-6005 and KT-6007
Dial uses 8 volt 300 X 4 milliamp bulbs with rubber base that push over two pins, same as the Sansui TU-717.
Kenwood KT-6500 and KT-6550
8 volt 300 milliamp X 3 green-tinted bulbs with rubber grommet base and wire leads - two for dial and one for meters.
Kenwood KT-7000 and KT-7001:
8 volt, 250 milliamp X 7 fuse type.. Upper and lower indicators (AM, FM, Mute, MPX) are 8 volt, 150 milliamp bayonet base.. The KT-7000 stereo indicator light is 'special' -- it is an 8 volt, 30 milliamp miniature.
Kenwood KT-7001
8 volt, 300 milliamp X 6 (fuse type, meters and illumination) 8 volt, 150 milliamp X 2 (bayonet type, Muting and MPX) 8 volt, 40 milliamp X 3 (miniature, AM, FM, Stereo)
Kenwood KT-7300
8 volt 300 milliamp X 3 green-tinted bulbs with rubber grommet base and wire leads - two for dial and one for meters.
Kenwood KT-7500 and KT-7550
8 volt 300 milliamp X 3 green-tinted bulbs with rubber grommet base and wire leads - two for dial and one for meters.
Kenwood KT-6005 and KT-6007
Dial uses 8 volt 300 milliamp X 4 bulbs with rubber base that push over two pins, same as the Sansui TU-717.
Kenwood KT-8300
8 volt 300 milliamp (fuse type)
Luxman T-110
Dial lamps - 4 "bayonet style"
A #53 bulb .
Marantz 120
Dial lamps - 8 volt, 200 milliamp (fuse type)
Dial pointer lamp - 8 volt, 0.06 amp
Meter lamp - 8 volt, 0.2 amp
Selector indicators - Bi-pin 6.3 volt or 8 volt, 0.04 amp
Most Marantz tuners from the 1970s (including models 120, 150, 115B and 2120) use the same fuse-type, 8 volt, 180-200 milliamp dial illumination lamps.
Marantz receivers
Most 2200 Series Marantz receivers used an 8 volt 200 milliamp lamp for the tuning dial and an 8 volt 300 milliamp lamp for the two meters. The 2265B uses five lamps behind the tuning dial and one lamp each behind the signal-strength and tuning meters. The lamps run on AC from an 8-volt transformer winding. The bulbs, known as fuse lamps, look like 3AG fuses and are socketed in fuse holders.
Pio
neer TX-7500
Dial illumination: 8 volt 300 milliamp "wedge type" lamps
Pilot ("power") and stereo indicators: 6 volt 30 milliamp X 2 "grain type" lamps with leads
Pioneer TX-9100
Tuning and signal-strength meter illumination lamps: 8 volt 300 milliamp.
Pioneer TX-9500II
8 volt 300 milliamp X 4
8 volt 50 milliamp X 1
6 volt 30 milliamp X 3
Pioneer TX-9800
8 volt 300 milliamp
6 volt 50 milliamp
Realistic TM-1001
8 volt 250 milliamp X 3
PL1: BF311-03030A 8V, 250 milliamp
PL2 and PL3: BF310-03030A 8V, 250 milliamp
The first one lights up the tuning dial and the bottom two light up the signal meter and multipath meter.
Sansui TU-217
No dial lamps used
Sansui TU-317
Dial uses 8 volt 300 milliamp X 3 bulbs with rubber base that push over two pins.
Sansui TU-417, TU-517, TU-519, TU-710, TU-717, TU-719, TU-919, TU-5900 and TU-9900
Dial uses 8 volt 300 milliamp X 4 bulbs with rubber base that push over two pins.
Sansui TU-7500
Stereo indicator lamp PL 010: 7 volt, 0.1 amp
FM/AM indicator lamps PL 007/008: 7 volt, 0.1 amp
Dial pointer lamp PL 009: 6 volt, 75 milliamp
Meter lamps PL 005/006: 6.3 volt, 0.25 amp
Sansui G-4700, G-5000, G-9000 and most (if not all) G-series receivers use the same bulb: 8 volt 200 milliamp bulb with rubber grommet base and wire leads.
Sansui TA-300 and TA-500 receivers
Although these receivers appear to have a TU-717 style case and face, they use different dial bulbs The bulbs in the TA-300/500 are wire leaded. They are 8 volt 300 milliamp like the TU-717 etc., but are not the push-on bulbs.
Yamaha T-1
14.5 volt 80 milliamp X 4 (wire-ended, clear bulbs)
Yamaha T-2
14.5 volt 80 milliamp X 4 (wire-ended, clear bulbs)
Feedback:
Hi Ed
I just wired up the first four I got from you and boy, are they fantastic or what? I am so glad I found you on eBay. Absolutely fantastic.
Thanks